THE PROP FINDER SITE
Boat Engine Brands » Search Suzuki Models » Boat Propeller Charts

Solas then Rubex brand charts displayed.

Suzuki 90hp, DF90A 4-Stroke Propellers

Searched
Suzuki Solas Dealer Locator
90
DF90A 4-Stroke (15 Spline)
2009 - Present
Please be aware that the selected engine is the DF90A and it should not be confused with the DF90.
Solas Amita 3 - Offshore
Aluminum - Exclusive squeeze cast process
- Stronger blades with better performance
- Outstanding acceleration and top speed
- Large Diameter
- See Amita 3 Video
Amita 3 - Offshore
- 3 Blade Propeller
- Thru-Hub Exhaust
- Pressed Rubber Bushing
Diameter Pitch Rotation Part Number
13.875 17 R 3411-139-17
13.875 19 R 3411-139-19
13.875 21 R 3411-139-21
Click part numbers to search Google (US).
Solas Amita 4 - Offshore
Aluminum - Exclusive squeeze cast process
- Stronger blades with better performance
- Great acceleration and midrange performance
- Great stern lift and handling
- See Amita 4 Video
Amita 4 - Offshore
- 4 Blade Propeller
- Thru-Hub Exhaust
- Pressed Rubber Bushing
Diameter Pitch Rotation Part Number
13.75 15 R 3413-138-15
13.75 17 R 3413-138-17
13.75 19 R 3413-138-19
13.75 21 R 3413-138-21
Click part numbers to search Google (US).
Solas HR Titan 3
Stainless - Performance prop for high speed planing hulls
- High rake blade design provides excellent bow lift
- Excellent acceleration and top speed
- Cupped blade design increases bite & reduces slip
- See HR Titan 3 Video
HR Titan 3
- 3 Blade Propeller
- Thru-Hub Exhaust
- Pressed Rubber Bushing
Diameter Pitch Rotation Part Number
13 7/8 15 R 3451-139-15
13 7/8 15 L 3452-139-15
13 7/8 17 R 3451-139-17
13 7/8 17 L 3452-139-17
13 7/8 19 R 3451-139-19
13 7/8 19 L 3452-139-19
13 7/8 21 R 3451-139-21
13 7/8 21 L 3452-139-21
13 7/8 23 R 3451-139-23
13 7/8 23 L 3452-139-23
13 7/8 25 R 3451-139-25
Click part numbers to search Google (US).
Thrust Washer Spacer Washer Nut Cotter Pin
OEM OEM OEM OEM OEM
This hardware is for OEM & Solas pressed rubber hub props only (not Rubex).
Rubex 3 Plus
Aluminum - Exclusive squeeze cast process
- Stronger blades with better performance
- Outstanding acceleration and top speed
- Larger blades than the Rubex 3 series
- See Rubex 3 Plus Video
Hub Rubex 3 Plus
- 3 Blade Propeller
- Thru-Hub Exhaust
- RBX-150 Hub Kit Required
Diameter Pitch Rotation Part Number
13.875 17 R 9411-139-17
13.875 19 R 9411-139-19
13.875 21 R 9411-139-21
Click part numbers to search Google (US).

powered by Rubex prop finder processor v.4.2.0 © Copyright 2010-2020

Notices

• ** Disclaimer: Pitch estimates and propeller selections made by this prop finder are provided only as a general reference and may not be correct for specific boats under actual boating conditions. By using this prop finder, you agree that the Solas Science and Engineering Company, Ltd, its dealers and other host entities do not accept any liability and are not responsible for harm to persons or property, damages or costs caused by the installation, handling or use of an indicated propeller or hardware.

• It is very important to refer to your engine's Owners Manual for important safety precautions when installing a propeller.

• A new propeller's hub and blades must be checked for sufficient lower unit and trim tab clearances before use.

• Wide open throttle RPM, with boat on the water in forward gear under normal loading conditions, should fall within the range that is recommended by the engine manufacturer and not exceed the recommended maximum. This is important in determining a suitable propeller pitch. When in doubt, dealer assistance is suggested.

• Prop installation, inspection and boat operation all need to be done in a safe and responsible manner.

* Trademarks
• Suzuki is a registered trademark of Suzuki Motor Corp
• Solas is a registered trademark of the Solas Science and Engineering Company, Ltd
• Rubex is a trademark of the Solas Science and Engineering Company, Ltd
All trademarks remain the property of their respective owners.

Note: Right (R or CW) is the standard rotation found on most single engine boats.