THE PROP FINDER SITE
Boat Engine Brands » Search Volvo Penta Models » Boat Propeller Charts

Solas then Rubex brand charts displayed.

Volvo Penta Aquamatic DuoProp, DP280 (27 Propellers

Searched
Volvo Penta Solas Dealer Locator
Aquamatic DuoProp
DP280 (27&19 Spline)
All Years
Dual props may require special tools to install. Please consult OEM manual for proper installation and for torque specs.
Illustration
Volvo Penta dual propeller assembly illustration
Solas Alum. Dual Prop Front Propeller
Aluminum - Exclusive squeeze cast process
- Stronger blades with better performance
- Outstanding acceleration and top speed
- must be used with a Solas aluminum Rear Prop
Alum. Dual Prop Front Propeller
- 3 Blade Propeller
- Non Thru-Hub Exhaust
- Pressed Rubber Bushing
Diameter Pitch Rotation Part Number
15.5 17 L 8512-155-17
15.3 19 L 8512-153-19
15.3 21 L 8512-153-21
Click part numbers to search Google (US).
Solas Alum. Dual Prop Rear Propeller
Aluminum - Exclusive squeeze cast process
- Stronger blades with better performance
- Outstanding acceleration and top speed
- must be used with a Solas aluminum Front Prop
Alum. Dual Prop Rear Propeller
- 4 Blade Propeller
- Non Thru-Hub Exhaust
- Pressed Rubber Bushing
Diameter Pitch Rotation Part Number
13.75 17 R 8513-138-17
13.75 19 R 8513-138-19
13.75 21 R 8513-138-21
Click part numbers to search Google (US).
Solas SS Dual Prop Front Propeller
Stainless - All-around performance
- Outstanding acceleration and top speed
- must be used with a Solas stainless Rear Prop
SS Dual Prop Front Propeller
- 3 Blade Propeller
- Non Thru-Hub Exhaust
- Pressed Rubber Bushing
Diameter Pitch Rotation Part Number
15 15 L 8532-150-15
15 17 L 8532-150-17
15 19 L 8532-150-19
15 21 L 8532-150-21
15-1/2 23 L 8532-155-23
15-1/2 25 L 8532-155-25
Click part numbers to search Google (US).
Solas SS Dual Prop Rear Propeller
Stainless - All-around performance
- Outstanding acceleration and top speed
- must be used with a Solas stainless Front Prop
SS Dual Prop Rear Propeller
- 3 Blade Propeller
- Non Thru-Hub Exhaust
- Pressed Rubber Bushing
Diameter Pitch Rotation Part Number
13.9 15 R 8551-139-15
13.9 17 R 8551-139-17
13.9 19 R 8551-139-19
13.9 21 R 8551-139-21
13.9 23 R 8551-139-23
13.9 25 R 8551-139-25
Click part numbers to search Google (US).
Thrust Washer Spacer Washer Nut Cotter Pin
OEM OEM OEM OEM OEM
This hardware is for OEM & Solas pressed rubber hub props only (not Rubex).

powered by Rubex prop finder processor v.4.2.0 © Copyright 2010-2020

Notices

• ** Disclaimer: Pitch estimates and propeller selections made by this prop finder are provided only as a general reference and may not be correct for specific boats under actual boating conditions. By using this prop finder, you agree that the Solas Science and Engineering Company, Ltd, its dealers and other host entities do not accept any liability and are not responsible for harm to persons or property, damages or costs caused by the installation, handling or use of an indicated propeller or hardware.

• It is very important to refer to your engine's Owners Manual for important safety precautions when installing a propeller.

• A new propeller's hub and blades must be checked for sufficient lower unit and trim tab clearances before use.

• Wide open throttle RPM, with boat on the water in forward gear under normal loading conditions, should fall within the range that is recommended by the engine manufacturer and not exceed the recommended maximum. This is important in determining a suitable propeller pitch. When in doubt, dealer assistance is suggested.

• Prop installation, inspection and boat operation all need to be done in a safe and responsible manner.

* Trademarks
• Volvo is a registered trademark of Volvo Penta Marine Products L.P.
• Solas is a registered trademark of the Solas Science and Engineering Company, Ltd
All trademarks remain the property of their respective owners.

Note: Right (R or CW) is the standard rotation found on most single engine boats.