Solas then Rubex brand charts displayed.

Propellers for Nissan 15hp, 2-Stroke

Manufacturer HP Model Year Range Solas Dealer Locator
Tohatsu/Nissan 15 2-Stroke (14 Spline) 1985 - 1997
2-1/2in. Gearcase
solas Amita 3 Amita 3
- Exclusive squeeze cast process
- Stronger blades with better performance
- Outstanding acceleration and top speed
Aluminum
3 Blade Propeller - Thru-Hub Exhaust - Pressed Rubber Bushing - See Amita 3 Video
Diameter Pitch Rotation Mfg Part Number
9.25 7 R 5111-093-07
9.25 8 R 5111-093-08
9.25 9 R 5111-093-09
9.25 10 R 5111-093-10
9.25 11 R 5111-093-11
9.25 12 R 5111-093-12
solas Amita 4 Amita 4
- Exclusive squeeze cast process
- Stronger blades with better performance
- Great acceleration and midrange performance
Aluminum - Great stern lift and handling
4 Blade Propeller - Thru-Hub Exhaust - Pressed Rubber Bushing - See Amita 4 Video
Diameter Pitch Rotation Mfg Part Number
9.25 7 R 5113-093-07
9.25 8 R 5113-093-08
9.25 9 R 5113-093-09
9.25 10 R 5113-093-10
9.25 11 R 5113-093-11
solas Amita 4 Amita 4 - High Thrust
- Exclusive squeeze cast process
- Stronger blades with better performance
- Excellent forward and reverse thrust
Aluminum - Ideal for kicker engines with heavy loads
4 Blade Propeller - Thru-Hub Exhaust - Pressed Rubber Bushing - See Amita 4 Video
Diameter Pitch Rotation Mfg Part Number
10 5 R 5113-100-05
10 7 R 5113-100-07
solas Saturn Saturn
- All-around general purpose performance
- More durable than aluminum
- Better efficiency than aluminum
Stainless
3 Blade Propeller - Thru-Hub Exhaust - Pressed Rubber Bushing - See Saturn Video
Diameter Pitch Rotation Mfg Part Number
9 1/4 7 R 5121-093-07
9 1/4 8 R 5121-093-08
9 1/4 9 R 5121-093-09
9 1/4 10 R 5121-093-10
9 1/4 11 R 5121-093-11
9 1/4 12 R 5121-093-12
Kit #17051501
Thrust Washer Washer Nut Cotter Pin
TATW TAWS TANT Apin (1-1/8")
TATW TAWS TANT APIN
This hardware is for OEM & Solas pressed rubber hub props only (not Rubex).

powered by Rubex prop finder processor v.3.7.2 © Copyright 2010-2020

Notices

• ** Disclaimer: Pitch estimates and propeller selections made by this prop finder are provided only as a general reference and may not be correct for specific boats under actual boating conditions. By using this prop finder, you agree that the Solas Science and Engineering Company, Ltd, its dealers and other host entities do not accept any liability and are not responsible for harm to persons or property, damages or costs caused by the installation, handling or use of an indicated propeller or hardware.

• It is very important to refer to your engine's Owners Manual for important safety precautions when installing a propeller.

• A new propeller's hub and blades must be checked for sufficient lower unit and trim tab clearances before use.

• Wide open throttle RPM, with boat on the water in forward gear under normal loading conditions, should fall within the range that is recommended by the engine manufacturer and not exceed the recommended maximum. This is important in determining a suitable propeller pitch. When in doubt, dealer assistance is suggested.

• Prop installation, inspection and boat operation all need to be done in a safe and responsible manner.

* Trademarks
• Nissan is a registered trademark of Nissan Jidosha Motor Corp
• Tohatsu is a registered trademark of Tohatsu Corp
• Solas is a registered trademark of the Solas Science and Engineering Company, Ltd
• All trademarks remain the property of their respective owners.


Note: Right (R or CW) is the standard rotation found on most single engine boats.