THE PROP FINDER SITE
Boat Engine Brands » Search Mercruiser Stern Drive Models » Boat Propeller Charts

Solas then Rubex brand charts displayed.

Mercruiser Bravo II (19 Spline) Propellers

Searched
Mercruiser Stern Drive Solas Dealer Locator
Bravo II (19 Spline)
Bravo Two
All Years
Solas Amita 3 - Bravo 2
Aluminum - Exclusive squeeze cast process
- Stronger blades with better performance
- Larger blades for superior thrust
- Suitable for heavy boats
- See Amita 3 Video
Amita 3 - Bravo 2
- 3 Blade Propeller
- Thru-Hub Exhaust
- Pressed Rubber Bushing
Diameter Pitch Rotation Part Number
19.5 11 R 1611-195-11
19.5 11 L 1612-195-11
19.5 13 R 1611-195-13
19.5 13 L 1612-195-13
19.3 15 R 1611-193-15
19.3 15 L 1612-193-15
18.8 17 R 1611-188-17
18.8 17 L 1612-188-17
18.3 19 R 1611-183-19
18.3 19 L 1612-183-19
17.8 21 R 1611-178-21
17.8 21 L 1612-178-21
Solas Titan
Stainless - Performance prop for high speed planing hulls
- High rake blade design provides excellent bow lift
- Excellent acceleration and top speed
- Cupped blade design increases bite & reduces slip
- See Titan Video
Titan
- 3 Blade Propeller
- Thru-Hub Exhaust
- Pressed Rubber Bushing
Diameter Pitch Rotation Part Number
19 1/4 15 R 1641-193-15
19 1/4 15 L 1642-193-15
18 3/4 17 R 1641-188-17
18 3/4 17 L 1642-188-17
18 1/4 19 R 1641-183-19
18 1/4 19 L 1642-183-19
17 3/4 21 R 1641-178-21
17 3/4 21 L 1642-178-21
17 1/2 23 R 1641-175-23
17 1/2 23 L 1642-175-23
17 1/4 25 R 1641-173-25
17 1/4 25 L 1642-173-25

powered by Rubex prop finder processor v.4.0.1 © Copyright 2010-2020

Notices

• ** Disclaimer: Pitch estimates and propeller selections made by this prop finder are provided only as a general reference and may not be correct for specific boats under actual boating conditions. By using this prop finder, you agree that the Solas Science and Engineering Company, Ltd, its dealers and other host entities do not accept any liability and are not responsible for harm to persons or property, damages or costs caused by the installation, handling or use of an indicated propeller or hardware.

• It is very important to refer to your engine's Owners Manual for important safety precautions when installing a propeller.

• A new propeller's hub and blades must be checked for sufficient lower unit and trim tab clearances before use.

• Wide open throttle RPM, with boat on the water in forward gear under normal loading conditions, should fall within the range that is recommended by the engine manufacturer and not exceed the recommended maximum. This is important in determining a suitable propeller pitch. When in doubt, dealer assistance is suggested.

• Prop installation, inspection and boat operation all need to be done in a safe and responsible manner.

* Trademarks
• Mercruiser is a registered trademark of the Brunswick Corporation
• Solas is a registered trademark of the Solas Science and Engineering Company, Ltd
All trademarks remain the property of their respective owners.

Note: Right (R or CW) is the standard rotation found on most single engine boats.