THE PROP FINDER SITE
Boat Engine Brands » Search Honda Models » Boat Propeller Charts

Solas then Rubex brand charts displayed.

Honda 15hp, BF15 Propellers

Searched
Honda Solas Dealer Locator
15
BF15 (8 Spline)
1991 - 2002
2-1/2in. Gearcase
Solas Amita 3
Aluminum - Exclusive squeeze cast process
- Stronger blades with better performance
- Outstanding acceleration and top speed
- See Amita 3 Video
Amita 3
- 3 Blade Propeller
- Thru-Hub Exhaust
- Pressed Rubber Bushing
Diameter Pitch Rotation Part Number
9.25 7 R 3111-093-07
9.25 8 R 3111-093-08
9.25 9 R 3111-093-09
9.25 10 R 3111-093-10
9.25 11 R 3111-093-11
9.25 12 R 3111-093-12
Click part numbers to search Google (US).
Solas Amita 4
Aluminum - Exclusive squeeze cast process
- Stronger blades with better performance
- Great acceleration and midrange performance
- Great stern lift and handling
- See Amita 4 Video
Amita 4
- 4 Blade Propeller
- Thru-Hub Exhaust
- Pressed Rubber Bushing
Diameter Pitch Rotation Part Number
9.25 7 R 3113-093-07
9.25 8 R 3113-093-08
9.25 9 R 3113-093-09
9.25 10 R 3113-093-10
9.25 11 R 3113-093-11
Click part numbers to search Google (US).
Solas Amita 4 - High Thrust
Aluminum - Exclusive squeeze cast process
- Stronger blades with better performance
- Excellent forward and reverse thrust
- Ideal for kicker engines with heavy loads
- See Amita 4 Video
Amita 4 - High Thrust
- 4 Blade Propeller
- Thru-Hub Exhaust
- Pressed Rubber Bushing
Diameter Pitch Rotation Part Number
10 5 R 3113-100-05
10 7 R 3113-100-07
Click part numbers to search Google (US).
Solas Saturn
Stainless - All-around general purpose performance
- More durable than aluminum
- Better efficiency than aluminum
- See Saturn Video
Saturn
- 3 Blade Propeller
- Thru-Hub Exhaust
- Pressed Rubber Bushing
Diameter Pitch Rotation Part Number
9 1/4 7 R 3121-093-07
9 1/4 8 R 3121-093-08
9 1/4 9 R 3121-093-09
9 1/4 10 R 3121-093-10
9 1/4 11 R 3121-093-11
9 1/4 12 R 3121-093-12
Click part numbers to search Google (US).
Kit #17061501
Thrust Washer Washer Nut Cotter Pin
HATW YAWS YANT Apin (1-1/8")
HATW YAWS YANT APIN
This hardware is for OEM & Solas pressed rubber hub props only (not Rubex).
Rubex 3
Aluminum - Exclusive squeeze cast process
- Stronger blades with better performance
- Outstanding acceleration and top speed
- See Rubex 3 Video
Hub Rubex 3
- 3 Blade Propeller
- Thru-Hub Exhaust
- RBX-A30 Hub Kit Required
Diameter Pitch Rotation Part Number
9.25 7 R 9111-093-07
9.25 8 R 9111-093-08
9.25 9 R 9111-093-09
9.25 10 R 9111-093-10
9.25 11 R 9111-093-11
9.25 12 R 9111-093-12
Click part numbers to search Google (US).

powered by Rubex prop finder processor v.4.2.0 © Copyright 2010-2020

Notices

• ** Disclaimer: Pitch estimates and propeller selections made by this prop finder are provided only as a general reference and may not be correct for specific boats under actual boating conditions. By using this prop finder, you agree that the Solas Science and Engineering Company, Ltd, its dealers and other host entities do not accept any liability and are not responsible for harm to persons or property, damages or costs caused by the installation, handling or use of an indicated propeller or hardware.

• It is very important to refer to your engine's Owners Manual for important safety precautions when installing a propeller.

• A new propeller's hub and blades must be checked for sufficient lower unit and trim tab clearances before use.

• Wide open throttle RPM, with boat on the water in forward gear under normal loading conditions, should fall within the range that is recommended by the engine manufacturer and not exceed the recommended maximum. This is important in determining a suitable propeller pitch. When in doubt, dealer assistance is suggested.

• Prop installation, inspection and boat operation all need to be done in a safe and responsible manner.

* Trademarks
• Honda is a registered trademark of Honda Motor Co., Ltd
• Solas is a registered trademark of the Solas Science and Engineering Company, Ltd
• Rubex is a trademark of the Solas Science and Engineering Company, Ltd
All trademarks remain the property of their respective owners.

Note: Right (R or CW) is the standard rotation found on most single engine boats.