BOATER RESOURCES

SOLAS PROPS TAIWAN SITE

Solas Boat Propellers (Link)

LANGUAGES

BOAT DEALER RESOURCES

Solas then Rubex brand charts displayed.

Propellers for Mercury 9.9hp, 4 Stroke Bigfoot/Sail

Manufacturer HP Model Year Range Solas Dealer Locator
Mercury 9.9 4 Stroke Bigfoot/Sail (10 Spline) 1999 - 2005
3in. Gearcase
solas Amita 3 Amita 3
- Exclusive squeeze cast process
- Stronger blades with better performance
- Outstanding acceleration and top speed
Aluminum
3 Blade Propeller - Thru-Hub Exhaust - Pressed Rubber Bushing - See Amita 3 Video
Diameter Pitch Rotation Mfg Part Number
11 9 R 1211-110-09
10.5 11 R 1211-105-11
10.3 12 R 1211-103-12
10.1 13 R 1211-101-13
10 14 R 1211-100-14
10 15 R 1211-100-15
solas Amita 4 Amita 4
- Exclusive squeeze cast process
- Stronger blades with better performance
- Great acceleration and midrange performance
Aluminum - Great stern lift and handling
4 Blade Propeller - Thru-Hub Exhaust - Pressed Rubber Bushing - See Amita 4 Video
Diameter Pitch Rotation Mfg Part Number
10.2 11 R 1213-102-11
10.1 12 R 1213-101-12
10 13 R 1213-100-13
10 14 R 1213-100-14
10 15 R 1213-100-15
solas New Saturn New Saturn
- All-around performance
- Good acceleration
- Large ear blade design
Stainless
3 Blade Propeller - Thru-Hub Exhaust - Pressed Rubber Bushing - See New Saturn Video
Diameter Pitch Rotation Mfg Part Number
10 3/4 10 R 1231-108-10
10 1/2 11 R 1231-105-11
10 1/4 12 R 1231-103-12
10 1/8 13 R 1231-101-13
10 14 R 1231-100-14
10 15 R 1231-100-15
solas HR Titan 4 HR Titan 4
- Great stern lift & acceleration
- High rake blade and cupped blade design
- Powerful thrust & very smooth performance
Stainless - Increased speed & economy in the mid-range
4 Blade Propeller - Thru-Hub Exhaust - Pressed Rubber Bushing - See HR Titan 4 Video
Diameter Pitch Rotation Mfg Part Number
10 10 R 1253-100-10
10 11 R 1253-100-11
10 12 R 1253-100-12
Solas Hardware for use with Solas Propellers
(Kit #17012501)
Thrust Washer Spacer Washer Nut
MBTW IOP MBWS MBNT
MBTW MBWS MBNT
This hardware is for OEM & Solas pressed rubber hub props only (not Rubex).

powered by Rubex prop finder processor © Copyright 2010-2018

Notices

• ** Disclaimer: Pitch estimates and propeller selections made by this prop finder are provided only as a general reference and may not be correct for specific boats under actual boating conditions. By using this prop finder, you agree that the Solas Science and Engineering Company, Ltd, its dealers and other host entities do not accept any liability and are not responsible for harm to persons or property, damages or costs caused by the installation, handling or use of an indicated propeller or hardware.

• It is very important to refer to your engine's Owners Manual for important safety precautions when installing a propeller.

• A new propeller's hub and blades must be checked for sufficient lower unit and trim tab clearances before use.

• Wide open throttle RPM, with boat on the water in forward gear under normal loading conditions, should fall within the range that is recommended by the engine manufacturer and not exceed the recommended maximum. This is important in determining a suitable propeller pitch. When in doubt, dealer assistance is suggested.

• Prop installation, inspection and boat operation all need to be done in a safe and responsible manner.

* Trademarks
• Mercury is a registered trademark of the Brunswick Corporation
• Solas is a registered trademark of the Solas Science and Engineering Company, Ltd
• All trademarks remain the property of their respective owners.


Note: Right (R or CW) is the standard rotation found on most single engine boats.