BOATER RESOURCES

SOLAS PROPS TAIWAN SITE

Solas Boat Propellers (Link)

LANGUAGES

BOAT DEALER RESOURCES

Solas then Rubex brand charts displayed.

Propellers for Mercury 9.9hp, 4 Stroke

Manufacturer HP Model Year Range Solas Dealer Locator
Mercury 9.9 4 Stroke (8 Spline) 2002 - 2004
2-1/2in. Gearcase
solas Amita 3 Amita 3
- Exclusive squeeze cast process
- Stronger blades with better performance
- Outstanding acceleration and top speed
Aluminum
3 Blade Propeller - Thru-Hub Exhaust - Pressed Rubber Bushing - See Amita 3 Video
Diameter Pitch Rotation Mfg Part Number
9.25 7 R 1111-093-07
9.25 8 R 1111-093-08
9.25 9 R 1111-093-09
9.25 10 R 1111-093-10
9.25 11 R 1111-093-11
9.25 12 R 1111-093-12
solas Amita 4 Amita 4
- Exclusive squeeze cast process
- Stronger blades with better performance
- Great acceleration and midrange performance
Aluminum - Great stern lift and handling
4 Blade Propeller - Thru-Hub Exhaust - Pressed Rubber Bushing - See Amita 4 Video
Diameter Pitch Rotation Mfg Part Number
9.25 7 R 1113-093-07
9.25 8 R 1113-093-08
9.25 9 R 1113-093-09
9.25 10 R 1113-093-10
9.25 11 R 1113-093-11
solas Amita 4 Amita 4 - High Thrust
- Exclusive squeeze cast process
- Stronger blades with better performance
- Excellent forward and reverse thrust
Aluminum - Ideal for kicker engines with heavy loads
4 Blade Propeller - Thru-Hub Exhaust - Pressed Rubber Bushing - See Amita 4 Video
Diameter Pitch Rotation Mfg Part Number
10 5 R 1113-100-05
10 7 R 1113-100-07
solas Saturn Saturn
- All-around general purpose performance
- More durable than aluminum
- Better efficiency than aluminum
Stainless
3 Blade Propeller - Thru-Hub Exhaust - Pressed Rubber Bushing - See Saturn Video
Diameter Pitch Rotation Mfg Part Number
9 1/4 7 R 1121-093-07
9 1/4 8 R 1121-093-08
9 1/4 9 R 1121-093-09
9 1/4 10 R 1121-093-10
9 1/4 11 R 1121-093-11
9 1/4 12 R 1121-093-12
Solas Hardware for use with Solas Propellers
(Kit #17011501)
Thrust Washer Spacer Washer Nut
MATW MASP MANT
MATW MASP MANT
Notice: This hardware is for OEM & Solas pressed rubber hub props only (not Rubex).

powered by Rubex prop finder processor © Copyright 2010-2016

Notices

• A new propeller's hub and blades must be checked for sufficient lower unit and trim tab clearances before use.

• Maximum RPM should fall within the range that is recommended by the engine manufacturer and not exceed the recommended maximum. This is important in determining a suitable propeller pitch. When in doubt, dealer assistance is suggested.

• Prop installation, inspection and boat operation need to be done in a safe and responsible manner.

• It is very important to refer to your engine's Owners Manual for important safety precautions when installing a propeller.

* Trademarks
• Mercury is a registered trademark of the Brunswick Corporation
• Solas is a registered trademark of the Solas Science and Engineering Company, Ltd
• All trademarks remain the property of their respective owners.


Note: Right (R or CW) is the standard rotation found on most single engine boats.